UK Series Fused Terminal Blocks

Fuse-type Terminal Blocks

The design feature of fuse-type terminal block is to use the breaking arm to access the G-type fuse, which is very convenient to operate. The enclosure is fully enclosed, safe and reliable. The terminal with luminous display will give the on-off signal of the fuse.

AKJ-4RD4RD, s a breakaway swivel am type safety terminal. Its feature is that the breakaway swivel am can be opened upward and fixed at the end position. The breakaway swivel arm can be equipped with a fuse. This terminal has two types, with and without luminous display.AK-10RD,10RDX are nut type fuse terminals. The fusible core can be 5x20mm, and the 5x25mm can be bridged by the centra connector AFB/ 10-12, with and without light . It will light up after the fuse is blown.

Precautions: The selection shall be based on the maximum power consumption (self heating) of the fuse. Check the heating condition of the fuse terminals carefully according to the use and installation method: when the use is used at high ambient temperature, it will bring extra load to the fuse. n this case, the rated working current should be adjusted accordingly.